Automatic Machining Center

CNC machining center with 5 controlled axes designed to perform any machining on the cut profile with the reinforcement pre-inserted.

The system is composed of an automatic magazine for loading cut profiles which feeds - through a CNC gripper operated by a linear motor - a multispindle machining module with tools for Pvc and/or metal reinforcement, which guarantees machining on each face of the profile, including those inclined.

5 Reasons to choose Linear Fab 5000

Process automation: It carries out each machining independently on the PVC profile with the pre-inserted reinforcement

Labor Reduction: To perform all the necessary machinings, only 1 operator is required to load the profiles.

High Buy Back.

Automatic profile alignment: Linearizes the bar that is not perfectly straight allowing maximum precision.

Production list management software: Allows the optimization of the number of bars to be used, leaving the operator only the task of loading and unloading the pieces.


  • Length (A)

    10.500 mm
  • Width (B)

    2.650 mm
  • Height (C)

    2.050 mm
  • Weight

    3.000 Kg


  • Installed power

    8 Kw
  • Supply

    400 V
  • Air consumption per cycle

    150 Nl/min
  • Minimum Operating Pressure

    7 bar
  • Operators



  • One-sash windows produced/8h*

    Up to 120

* Dependent on processes and type of profile used.

Automatically loadable profile dimensions

  • Length

    350 / 3.500 mm
  • Width

    40 / 130 mm
  • Height

    40 / 130 mm

Loading Module

  • Loading magazine with max. capacity of 10 bars
  • Bar loading system via step-by-step belt
  • CNC profile gripping system with 3 controlled axes, driven by linear motor and prismatic guides with position reading on centesimal magnetic strip

Unloading Module

  • Automatic extractor for machined profiles
  • Unloading magazine with safety photocell
  • Max. Capacity of unloading 10/12 pieces

Machining Module


Up to 13 High Speed Spindles



  • Slots for condensate drain
  • Handle holes
  • Hinge holes on sashes
  • Ventilation holes
  • Cylinder hole                 
  • Burglary for the lock
  • Closure Marking
  • All other possible machinings required on PVC profiles

PVC + Reinforcement

  • Fixing screwing (if configured with screwing unit)
  • Wall fixing holes
  • Handle holes
  • Cross fixing holes
  • Door hinges holes
  • Hinge holes for window frames
  • All other possible holes required on PVC profiles with reinforcement

On request the machine can be equipped with:

  • Up to 11 additional spindles configurable according to the necessary machinings (Pvc or Pvc + reinforcement).
  • Advance reinforcement screwing unit consisting of 2 opposing automatic screwdrivers equipped with a special basket for loading screws (850 Nl/min required).
  • Special clamps for automatic loading of 180 mm high profile.
  • Bar code reader Radio CCD.
  • Remote assistance connection via Internet (TCP-IP).