Automatic Cutting Center

CNC cutting center with 1 or 2 controlled axes according to the chosen configuration, designed to perform cuts on PVC profiles quickly and optimally.

Compact and fast, it is a system built with the most innovative technology available on the market and it is designed to perform all the required operations - profile loading from the bar magazine, cutting and unloading of the finished piece - in complete autonomy, without the intervention of the operator.

5 Reasons to choose Cut 500

Versatile, reliable and precise over time.

Optimizes production lists: Fewer bars used thanks to Graf Synergy software.

Maximum precision over time: Thanks to the automatic profile alignment system that linearizes the bar that is not perfectly straight.

User Friendly Technology: Intuitive system for simple management of work cycles.

High Buy Back value.


  • Length (A)

    12.000 mm
  • Width (B)

    2.200 mm
  • Height (C)

    1.600 mm
  • Weight

    2.850 Kg


  • Installed power

    7 Kw
  • Supply

    400 V
  • Air consumption per cycle

    100 Nl/min
  • Minimum Operating Pressure

    7 bar
  • Operators



  • One-sash windows produced/8h*

    Up to 300

* Dependent on processes and type of profile used.

Automatically loadable profile dimensions

  • Length

    500 / 6.500 mm
  • Width

    40 / 130 mm
  • Height

    40 / 135 mm

Loading Module

  • Loading magazine with max. capacity of 10-12 bars
  • Bar loading system with straps
  • Profile pusher moved by brushless motor and rack

Unloading Module

  • Automatic extraction of the cut profiles
  • Unloading magazine with safety photocell
  • Max. Capacity of unloading 15/20 pieces

Cutting Module 


1 blade Ø 500 mm with very high cutting precision over time of PVC profiles also equipped with gaskets 

Rising movement


  • Possible cutting angles -45°/90°/+45°

On request the machine can be equipped with:

  • Profile loading system for profile length from 400 to 700 mm.
  • Blade Ø 550 mm (necessary to cut 180 mm profiles) with additional presser kit.
  • Possibility of inserting mechanical stops for fixed size intermediate cuts.
  • Blade rotation by brushless motor for cuts at intermediate angles (between -45° and + 45°).
  • Fly Optimizer: automatic measurement system of rest bar that allows you to optimize the production list again in order to reuse the production leftovers.
  • Customized solution for adapting the machine to profiles with particular shapes (post technical analysis).
  • Chip conveyor - Version 1.200 mm or 2.000 mm.
  • Exhauster with 2 bags: ECOPOL D2-T500 Version with 4 outlets Ø 100.
  • Possibility of predisposition for automatic connection to 1 or 2 ASG-E screwing centers.
  • Manual labeling machine.
  • Horizontal profile clamps system with locking capacity for large section cuts (up to 230 mm).
  • Unloading table extension.
  • Profile width measurement sensor: Warns in case of wrong profile loading.
  • Profile height measurement sensor: Warns in case of wrong profile loading.
  • Horizontal clamps for cutting profiles 30-130 mm wide.

Available Variants
Preparation for cutting aluminum profiles.