Automatic Cutting Center
CNC cutting center with 3 controlled axes, designed to perform cuts on Vinyl profiles quickly and optimally.
Built with the most innovative technology is designed to perform all the required operations - profile loading from the bar magazine, cutting and unloading of the finished piece - in complete autonomy, without operator intervention.
5 Reasons to choose Linear Cut 500
Versatile, reliable and precise over time.
Optimizes production lists: Fewer bars used thanks to Graf Synergy software.
Maximum precision over time: Automatic profile alignment system (that linearizes the bar that is not perfectly straight) and CNC profile gripper with reading of the real position through a centesimal magnetic strip.
User Friendly Technology: Intuitive system for simple management of work cycles.
High Buy Back value.
Dimensions
-
Length (A)
12.500 mm -
Width (B)
2.200 mm -
Height (C)
2.000 mm -
Weight
3.000 Kg
Details
-
Installed power
7 Kw -
Supply
400 V -
Air consumption per cycle
100 Nl/min -
Minimum Operating Pressure
7 bar -
Operators
1
Performance
-
One-sash windows produced/8h*
Up to 300
* Dependent on processes and type of profile used.
Automatically loadable profile dimensions
-
Length
500 / 6.500 mm -
Width
40 / 130 mm -
Height
40 / 135 mm
Loading Module
- Loading magazine with max. capacity of 9 bars
- Bar loading system with straps
- 2-axis CNC profile gripper controlled by linear motor on prismatic guides
Unloading Module
- Automatic extractor of cut profiles on unloading table
- Unloading magazine with safety photocell
- Max. Capacity of unloading 15/20 pieces
On request the machine can be equipped with:
- Profile loading system for profile length from 400 to 700 mm.
- Blade Ø 550 mm (necessary to cut 180 mm profiles) with additional presser kit.
- Possibility of inserting mechanical stops for fixed size intermediate cuts.
- Blade rotation by brushless motor for cuts at intermediate angles (between -45° and +45°).
- Fly Optimizer: Automatic measurement system of rest bar that allows you to optimize the production list again in order to reuse the production leftovers.
- Customized solution for adapting the machine to profiles with particular shapes (post technical analysis).
- Chip conveyor - Version 1.200 mm or 2.000 mm.
- Exhauster with 2 bags.
- Possibility of predisposition for automatic connection to 1 or 2 ASG-E screwing centers.
- Manual labeling machine.
- Horizontal profile clamps system with locking capacity for large section cuts (up to 230 mm).
- Unloading table extension.
- Profile width measurement sensor: Warns in case of wrong profile loading.
- Profile height measurement sensor: Warns in case of wrong profile loading.
- Horizontal clamps for cutting profiles 30-130 mm wide.
Available variants
Preparation for cutting aluminum profiles.
Possibility of integrating the V-Notch cutting unit.