CNC 8-head Welding machine
The first and only 8 CNC head welding machine in the world that completely eliminates the welding curb from the corner allowing you to obtain Pvc windows with uniform quality and superior aesthetics.
Natural evolution of the 4-head SL4-FF Evo, thanks to the 4 extra heads allows to weld simultaneously the 4 corners of a Pvc framework complete with 2 crosspieces (front welding) without the need for cleaning (Patented Seamless Welding) or subsequent retouching.
5 Reasons to choose the SL8 FF TR
Reduction of time and space: In a single cycle it welds simultaneously the 4 angles at 45° and 2 crosspieces in 90° mode.
Cost reduction: After welding, there is no need to clean or touch up and therefore neither the cleaner nor the turntable is needed.
Labor reduction: Not having to finish the corners, only 1 operator is required to load the profiles.
Possibility to weld profiles coated with any type of film or foil such as anodized aluminum, painted aluminum, painted Vinyl and Vinyl covered with natural wood or acrylic.
Solves the problem of profile tolerances: A special automatic calibration system allows to compensate it.
Length (A)6.000 mm
Width (B)5.600 mm
Height (C)2.200 mm
Installed power25 Kw
Air consumption per cycle225 Nl/min
Minimum Operating Pressure7 bar
Welded frames*Up to 1/140 sec.
* Depends on type of profiles, seals, geometry and welding seam.
Height58 ÷ 180 mm
Width40 ÷ 130 mm
Height58 ÷ 100 mm
Width50 ÷ 130 mm
Maximum3.200 x 4.000 mm (on request up ot 6.000 mm)
Minimum*370 x 670 mm
* It changes depending on the profile used.
Upon request the machine can be equipped with:
- Increased cooling table for sizes 3628, 4028, 4528, 5028.
- Y axis increase 4.000 mm.