Automatic Cutting Center

CNC cutting center with 3 controlled axes, designed to perform cuts on Aluminium profiles quickly and optimally.

Built with the most innovative technology is designed to perform all the required operations - profile loading from the bar magazine, cutting and unloading of the finished piece - in complete autonomy, without operator intervention.

5 Reasons to choose Linear Cut 500 Alu

Versatile, reliable and precise over time.

Optimizes production lists: Fewer bars used thanks to Graf Synergy software.

Maximum precision over time: Automatic profile alignment system (that linearizes the bar that is not perfectly straight) and CNC profile gripper with reading of the real position through a centesimal magnetic strip.

User Friendly Technology: Intuitive system for simple management of work cycles.

High Buy Back value.


  • Length (A)

    12.500 mm
  • Width (B)

    2.200 mm
  • Height (C)

    2.000 mm
  • Weight

    3.000 Kg


  • Installed power

    7 Kw
  • Supply

    400 V
  • Air consumption per cycle

    100 Nl/min
  • Minimum Operating Pressure

    7 bar
  • Operators



  • One-sash windows produced/8h*

    Up to 300

* Dependent on processes and type of profile used.

Automatically loadable profile dimensions

  • Length

    500 / 6.500 mm
  • Width

    40 / 130 mm
  • Height

    40 / 135 mm

Loading Module

  • Loading magazine with max. capacity of 8 bars
  • Bar loading system with straps
  • 2-axis CNC profile gripper controlled by linear motor on prismatic guides

Unloading Module

  • Automatic extractor of cut profiles on unloading table
  • Unloading magazine with safety photocell
  • Max. Capacity of unloading 15/20 pieces

Cutting Module 


1 blade Ø 500 mm with very high cutting precision over time of Aluminium profiles

Rising movement


  • Possible cutting angles -45°/90°/+45°

On request the machine can be equipped with:

  • Profile loading system for profile length from 400 to 700 mm.
  • Blade Ø 550 mm (necessary to cut 180 mm profiles) with additional presser kit.
  • Possibility of inserting mechanical stops for fixed size intermediate cuts.
  • Blade rotation by brushless motor for cuts at intermediate angles (between -45° and +45°).
  • Fly Optimizer: Automatic measurement system of rest bar that allows you to optimize the production list again in order to reuse the production leftovers.
  • Customized solution for adapting the machine to profiles with particular shapes (post technical analysis).
  • Chip conveyor - Version 1.200 mm or 2.000 mm.
  • Exhauster with 2 bags.
  • Possibility of predisposition for automatic connection to 1 or 2 ASG-E screwing centers.
  • Manual labeling machine.
  • Horizontal profile clamps system with locking capacity for large section cuts (up to 230 mm).
  • Unloading table extension.
  • Profile width measurement sensor: Warns in case of wrong profile loading.
  • Profile height measurement sensor: Warns in case of wrong profile loading.
  • Horizontal clamps for cutting profiles 30-130 mm wide.

Available variants
Preparation for cutting Vinyl profiles