Automatic Machining and Cutting Center
7 axis CNC cutting and machining center designed to perform all the machining and cutting on the Aluminium profiles.
Compact and versatile, it is a system built with the most innovative technology available on the market and guarantees extremely high reliability and precision over time.
5 Reasons to choose Fab Cut Alu
Versatile, reliable and precise over time.
Optimize production lists: Fewer bars used thanks to Graf Synergy software.
Maximum precision: Automatic profile alignment system (it linearizes the bar that is not perfectly straight) and CNC profile gripper with reading of the real position by means of a centesimal magnetic strip.
Machining Centre equipped with a 3 longitudinal axis that allows machining with blocked profile.
High Technology: Machining module capable of accommodating up to 12 High Speed spindles (6 Standard) and a rising 1-blade cutting module that guarantees extremely precise cuts.
Dimensions
-
Length (A)
14.900 mm -
Width (B)
3.400 mm -
Height (C)
2.500 mm -
Weight
3.000 Kg
Details
-
Installed power
20 Kw -
Supply
400 V -
Air consumption per cycle
120 Nl/min -
Minimum Operating Pressure
7 bar -
Operators
1
Performance
-
One-sash windows produced/8h*
Up to 100
* Dependent on processes and type of profile used.
Automatically loadable profile dimensions
-
Length
700 / 6.500 mm -
Width
40 / 130 mm -
Height
40 / 130 mm
Loading Module
- Loading magazine with max. capacity of 10 bars
- Bar loading system with straps
- Profile pusher moved by brushless motor and rack
Unloading Module
- Automatic extraction of the cut profiles on an unloading table
- Unloading magazine with safety photocell
- Max. Capacity of unloading 15/20 pieces
Machining Module
Structure
6 High Speed spindles
Machinings
- Slots for condensate drain
- Handle holes
- Hinge holes
- Ventilation holes
- Cylinder hole
- Burglary for the lock
- Closure Marking
- All other possible machinings required on Aluminium profiles
Cutting Module
Structure
1 blade Ø 500 mm with very high cutting precision over time of Aluminium profiles
Rising movement
Machinings
- Possible cutting angles -45°/90°/+45°
On request the machine can be equipped with:
- Configuration with 6 additional spindles.
- Bar gripping system using a 2-axis CNC gripper on a linear motor on a prismatic guide.
- Profile loading system for profile length from 400 to 700 mm.
- Blade Ø 550 mm (necessary to cut 180 mm profiles) with additional presser kit.
- Blade rotation by brushless motor for cuts at intermediate angles (between -45° and +45°).
- STATS: Software for the analysis of production data that reports the timing of daily, weekly, monthly and annual operations.
- Fly Optimizer: Automatic measurement system of the bar remains that allows you to optimize the production list again in order to reuse the production leftovers.
- Retrieve option: The application allows you to re-insert the pieces to be machined again in the cutting lists following production errors, a new cutting list optimized for these.
- Tool break sensors.
- Customized solution for adapting the machine to profiles with particular shapes (post technical analysis).
- Chippings conveyor - Version 1.200 mm or 2.000 mm.
- Exhauster with 2 bags.
- Soundproof booth.
- Motorized unloading table with belts with output on the opposite side of the loading.
- Possibility of predisposition for automatic connection to 1 or 2 ASG-E screwing centers.
- Manual labeling machine.
- Labeling machine with automatic label applicator.
- Possibility of inserting mechanical stops for fixed size intermediate cuts.
- Horizontal profile clamps system with locking capacity for large section cuts (up to 230 mm).
- Unloading table extension.
- Profile width measurement sensor: Warns in case of wrong profile loading.
- Profile height measurement sensor: Warns in case of wrong profile loading.
- Horizontal clamps for cutting profiles 30-130 mm wide.
Available variants
Possibility of integration of the automatic cross-sectioning unit.